![\"\"](\"\/wp-content\/uploads\/2020\/03\/pho_koriyama01.jpg\")
\r\nFeatures<\/h3>\r\n 1. Specialized facilities for prototype production<\/h4>\r\n
The prototype center is equipped with five types of NC multi-forming machines, for wire diameters is from 0.05 to 2.0 mm, with the capability to handle incredibly small springs with wire diameters down to 15 \u03bcm. Capacity is available for push springs up to wire diameter \u03c60.015\/O.D. \u03c60.075, for pull springs up to wire diameter \u03c60.08\/O.D. \u03c60.8, and torsion springs up to wire diameter \u03c60.05\/O.D. \u03c60.5. Since we can also handle automatic machining from the time of trial manufacture, we can also manufacture prototypes in large quantities.<\/p>\r\n\r\n
2. Staff with advanced technological capabilities<\/h4>\r\n
Our staff comprises specialists with highly technical capabilities who have experienced the operation of NC multi-forming machines for more than 15 years. In addition to checking drawing dimensions, loads, durability, etc. beforehand, we also draw them from the actual product and the partner parts, and design and draw them in accordance with the required loads and torque. We are also engaged in the development of ADVANEX’s original attachments for complex requests, such as those that allow a single spring to have more than one function.<\/p>\r\n\r\n
3. Production collaboration both in Japan and overseas<\/h4>\r\n
Everyone is familiar with the facilities and production levels at the Kashiwazaki Plant and overseas plants, which are production bases, so they can examine the feasibility of processing, and find problems in advance. Prototype tools, tool layouts, and programs can be transferred regardless of whether they are in Japan or overseas. Tool layouts, processing conditions, inspection data, etc. at the time of prototyping are stored in a database, so they can be checked from any site. Through such collaboration, we can smoothly perform everything from prototyping to production.<\/p>\r\n\r\n
4. Inspection equivalent to that at the production site<\/h4>\r\n
It is equipped with the same testing machine as the Kashiwazaki Plant and overseas plants, so it is possible to test and measure load tests, torque tests, two-dimensional measurements, etc. under the same conditions as the production site. Jig design is also performed according to the measurement conditions.<\/p>\r\n\r\n
5. Responding to a wide variety of requests from customers<\/h4>\r\n
SUS304WPB, SWP-A, B and Ni-plated hard steel wires are always available on customer demand. The NC multi-forming machine does not require complicated dies, so it is even possible to respond on the same day. Depending on the request, we can meet requests for different dimensions and loads while meeting at the factory.<\/p>\r\n\r\n
Interview<\/h2>\r\n Interview with Mr. Eito Nagayama of the Koriyama Prototype Center
\r\n Movie 1: Facilities, production capacity, and inspection system at the Prototype Centre<\/h3>\r\n \r\n
\r\n Movie 1: Facilities, production capacity, and inspection system at the Prototype Centre<\/h3>\r\n