NC Multi-Forming

NC multi-forming is capable of numerically controlling the position and timing of all tools by means of a servo motor. Fine-tuning bending and winding angles is easy, so it is possible to make samples with modified characteristics quickly, allowing customers to immediately check the optimum shape.
Settings can also be changed simply by replacing the tool at the slide end or the spinner. By making full use of touch and image sensors, we can guarantee 100% of critical characteristics. Advanex owns an overwhelming number of NC multi-forming machines. Similar facilities are installed at the prototype center, mass-production plants, and overseas plants, so transfers can be done smoothly.


Sorry, this video is only available in Japanese.

NC multi-forming machines process products by moving wire guides, slides, spinners, etc. via programming. High-precision servo motors provide peak performance in position control and suppresses product variations. This type of machine can be machined by securing the slide and rotating the wire to its tool position. This eliminates the need for slide replacement, resulting in a shorter set-up time. Once machining is complete, the product is retrieved with a pick up.


Sorry, this video is only available in Japanese.

The NC multi-forming machine adjusts the setup and product dimensions by changing the programming. Material sent from the back of the machine is fed from a wire guide into which various tools attached to the slide are fed. Body coils are processed and hooking and bending are carried out according to the program. Since the opposite angle of the hook is important for the pull spring, the wind angle is controlled by the touch sensor.